Norm MacMillan sent us these photos of the really neat installation he as done on his Ford F150 Raptor. Norm wanted to retain the superior off-road capabilities of his Raptor while improving its load carrying and towing capabilities.
To get the best of both worlds, he has fitted our LA-92 Ford Raptor Load Assist kit with a triple bag upgrade and our new electronic Articulation Kit. He also installed a three button digital incab kit along with our remote control option and an upgrade to the PX06 Compressor and AT-01 Aluminium take for onboard air.
This is what Norm had to say about his installation, “It appears the triple bellows with the articulation valve open, and large hoses, have accommodated the extreme suspension travel (approx. 300mm) and articulation of the Raptor. I have maintained a minimum half inch ID hose between the bags. Seems to give almost immediate articulation of the suspension when required. Solenoids and articulation valve are mounted as high as possible under the ute tub while keeping the lines minimum length. Heavy duty compressor and tank mount on the drivers side of the chassis under the cab with remote mount intake filter at the top of the ute tub in the well. I was able to mount the gauge with switches for articulation and compressor, up and down in the dash panel below steering for factory look. Also mounted remote control receiver on the back of dash panel out of sight and seems to work well.”