ROT-120 RIDE HEIGHT SENSORS W/O LINKAGE & HARDWARE
$195.00
On air suspension systems, some items may have to be replaced or serviced over time depending on how much you use your system and what type of climate you are in. Our eLevel+ kit utilizes ride height sensors to read where your vehicle currently sits to give you accurate readings in your e+ app. These AccuAir e-Level sensors feature a plug and play design to make them fully replaceable if you have one become damaged or start to malfunction. This sensor is a direct replacement for the sensors found in all e-level kits and will help get your air suspension system functioning properly again.
This is a sensor only, the linkage and hardware are not included.
Related products
-
VU4 4-CORNER MANIFOLD (NPT)
$950.00AccuAir knows the importance of a high quality valve manifold and that is why we have developed the VU4 valve manifolds for your air suspension systems. This VU4 valve manifold is a 4 corner manifold, meaning that it is designed to inflate and deflate 4 individual air springs. The VU4 manifold is outfitted with ¼” NPT fittings on all ports for easy installation of your air suspension system plumbing.
At AccuAir, we are all about ease of installation and keeping things clean. On the VU4 manifolds, you will get a high-quality, weather-proof plug-n-play harness to help make your installation quick and get accurate wire connections built to last in the harsh under-vehicle environment. To add to the already high-quality construction, each of these valve manifolds will feature all stainless steel valve components. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. These manifolds help to provide the cleanest installation possible while delivering the most reliable operation on the market today. Pick up one of the AccuAir VU series valve manifolds for your air suspension system and make installation quick and easy.
Overall size of the VU4 4-Corner Manifold (NPT): 5.28″ x 2.75″ x 2.75″
Add to cartMORE INFO -
0-200 PSI AIR SUSPENSION TANK PRESSURE SENSOR
$115.00Accidents happen, especially during the installation of parts where something as simple as a mistake can cause a part to become damaged. AccuAir knows that not every install can go perfectly, so we offer replacement parts to make sure that you can complete your install with hard-to-find kit components to replace damaged parts. The tank pressure sensor on your air tank can become damaged during install, during normal use, or simply begin to malfunction due to old age or misuse. AccuAir offers this direct replacement 0-200 PSI tank pressure sensor (air suspension pressure sensor) to get your damaged or malfunctioning sensor replaced and have your air suspension system working perfectly again.
Add to cartMORE INFO -
ROT-120 PLASTIC ARM REPLACEMENT
$35.00The ride height sensors on the AccuAir e-Level kits utilize a 2 piece system which includes the actual sensor, and the plastic arm that mounts to the top. Oftentimes, a malfunctioning ride height sensor may not require the full sensor to be replaced, only the arm. Instead of having to purchase the whole sensor, AccuAir has made it very simple to replace just the arm with this direct replacement ROT-120 plastic arm replacement.
This plastic arm simply bolts in place of the factory arm for a quick and easy replacement to get your air suspension system working properly again.
Add to cartMORE INFO -
E-LEVEL+ CONNECT ECU W/ HARNESS + PRESSURE SENSOR (TOUCHPAD REQUIRED)
$985.00IMPORTANT NOTE: THIS ECU IS NOT COMPATIBLE WITH THE JEEP JL OR JT AIR SUSPENSION KITS.
If you are looking for an entry level control system that is simple while offering smartphone capabilities, the e+ Connect ECU is a great choice. This kit will include the e+ Connect ECU+, with harness and pressure sensor, and through the e-Level+ app for iPhone and Android, it is a great source for diagnostics, and adjustability.
While this kit is a very simple way to get convenient air system management, you will need a few other components to finish up your install. You will need a manifold such as the AccuAir VU4 4 corner manifold to control the air in your system. If you are wanting a cleaner setup and an all-in-one solution, check out our ENDO-VT air tank which has the valve integrated into the tank.
Please note: A touchpad is required.
Bluetooth
AccuAir’s e+ Connect is 5.0 Bluetooth enabled for a simpler user experience and better performance and reliability. 5.0 Bluetooth allows for long range use and is standard on all systems.Over The Air Updates
Gone are the days of outdated software and controllers that have to be replaced due to advances in software. e-Level+ allows for over-the-air updates to future proof with the latest features and functions.RGB Backlighting
With the e+ Connect, you will get a beautiful and modern ECU with an AccuAir logo design and RGB backlighting. This allows you to get the perfect look for your trunk or wherever you choose to mount your ECU.Height Indication
When using the Height+ upgrade, you can get a visual display of your height % in the e-Level+ app.100% Plug-n-Play
The e+ Connect is going to include an ECU+, a wireless switch box, and the e-Level+ app. A 100% plug and play wiring harness will be included for easy installation.Ride-Height-On-Start
Want to give your air suspension an extra touch of customization? e+ Connect allows for your vehicle to automatically lift to the driving height upon starting your vehicle. when using e+height.eLevel+ App
This kit comes with accessibility for AccuAir’s e-Level+ app. This app allows you to make any adjustment to your air suspension system through the convenience of the app. The app is laid out similar to our TouchPad+ for great looks and easy usability.Automatic Calibration
When using Height+, this kit will automatically learn how to adjust for your vehicle through automatic calibration.Battery Saver mode
If your system has not been used in 24 hours, it will automatically shut off to save battery.3 Programmable Heights
Since this kit utilizes Height+ sensors, you will get to program 3 different heights, lowered, ride height, and raised. This allows you to get to the exact stance you are wanting instantly without having to purge your valves to get the right look.TruPosition Height Sensors
The Height+ system utilizes TruPosition height sensors to allow for accurate leveling of your air suspension system regardless of load.Important Note: Wireless device not included. Intended to be used with your phone or tablet. This product listing includes a harness and pressure sensor. Please contact us if you have any questions or concerns.
Add to cartMORE INFO