Assisting a Fiat Ducato Camper Van

A customer came to see us with a problem. His Fiat Ducato Camper Van was sitting a bit low in the rear. The drivers side has a push out section and the weight caused the camper to sit even lower on that side. The sag was worse when the side was extended.

The solution was one of our Load Assist kits with a Three Button Digital Incab kit. The Three Button Incab has one button for inflating both the airbags and two buttons for deflating, one for each side. The dual readout pressure gauge tells you the pressure in each airbag. With this installed, our customer can raise the camper and adjust the side to side heigh to get it nice and level from the comfort of the drivers seat.

In this particular example, there was not enough space between the chassis rail and the axel for our standard Ducato Load Assist kit but we were able to identify an alternative top bracket from our range to suit.

We have an extensive range of kits that fit most makes and models of Utes and Vans but we are always open to helping out with something a little bit different.