Onboard Air Kits
Showing 1–16 of 23 results
-
Incab Air Kit PX02 Tank
$549.00Onboard Air control for Load Assist Kits from inside your cab.
Simple installation and controls bags independently.
PX-02 1/4 hp 12V BOSS Air Compressor, 1 Gallon Aluminium Air tank, 1 x Mini 12v Valve, 1 x 70-100psi Pressure Switch-or 4 payments of $137.25 with Afterpay
Add to cartMORE INFO -
Street Cruiser Impressor Kit
$469.00This kit is a great starter air package kit for a 2 airbag system, onboard air for the 4×4 or running air lockers.
It comes with –
1 x PX-06 12volt 100% Duty, 1.8cfm Air Compressors
1 x AT-03 5 port Boss Aluminium Air Tank
1 x 110-135psi Pressure Switch
1 x Check Valves
1 x Braided Hoses
1 x Brass 1/4″ Bung
1 x Drain Tap
1 x 40amp Relay
Instruction Sheet-or 4 payments of $117.25 with Afterpay
Add to cartMORE INFO -
Boss Air Locker 2
$429.00This kit is suitable to run air lockers, small air tools, small tyres and
situations where reasonable air volume is needed. Great tank to mount
alongside chassis.
Includes:
1 x PX-02 1/4 hp 12 volt BOSS Air Compressor
1 x AT-02 2 Gallon/ 6ltr Boss Aluminium “Hotdog” Air Tank
1 x 70-100psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Brass “T” for pressure switch
1 x Drain Tap
Instruction Sheet-or 4 payments of $107.25 with Afterpay
Add to cartMORE INFO -
BOSS Air Locker 1
$419.00Includes:
1 x PX-02 1/4 hp 12 volt BOSS Air Compressor
1 x AT-01 1 Gallon/ 3ltr Boss Aluminium Air Tank
1 x 70-100psi Pressure Switch
1 x 700mm Teflon Coated Stainless Steel Braided Hose
1 x 100% Duty Solenoid
1 x Check Valve
1 x Flare Fitting
1 x Brass “T” for pressure switch
1 x Drain Tap
Instruction Shee-or 4 payments of $104.75 with Afterpay
Add to cartMORE INFO -
Airbag Inflation Kit PX01 Incab Airbag control
$349.00This kit is used to control Load Assist Kits from inside your cab without the need for a tank and electric valves.
Simple installation and controls bags independently up and down
Includes:
1 x PX-01 12V BOSS Air Compressor.
1 x Stamped stainless steel gauge panel.
2 x Pneumatic Push Buttons for dropping each bag.
1 x 12V momentary switch for compressor.
1 x BOSS 200psi Dual Needle back-lit Gauge.
10 meters of 1/4” J844 DOT Airbrake line.
2 x 1/4” push connect check valves.
3 x Y Connectors.
2 x T Connectors.
4 x 1/4” female push fittings for gauge and buttons.
10 x Cable Ties.
Instruction Sheet.-or 4 payments of $87.25 with Afterpay
Add to cartMORE INFO
- 1
- 2