PRESSURE+ SWITCH AIR SUSPENSION MANAGEMENT UPGRADE
$420.00
For those who are wanting to inflate and deflate their airbags to certain pressure settings, the AccuAir Pressure+ upgrade is going to be the solution. Similar to our Height+ sensors, the Pressure+ upgrade allows for pressure-based control within your ePlus app. This system uses the e+ ECU and can be enabled in the advanced settings in the ePlus app.
Intended for Sport and Compact automobiles
Features
Shows Individual Spring Pressure
Requires A Pressure-Based Calibration To Be Performed From The App
Used In Conjunction With A Pressure Sensor Kit
Uses The Same Touchpad+
Can Easily Be Used With VU4 Using ¼ NPT to ⅛ NPT Reducers
Can Easily Be Used With ENDO-VT or Any Other Manifold By Placing Pressure Sensor Tee Inline Between Valve And Springs
Pressure+ vs Height+
To give you a better idea of the differences between the Pressure+ and Height+ systems, let’s look at some pros and cons when comparing.
Pros
The Pressure+ Kit Is Easier To Install Than Height Sensors
The Pressure+ Kit Has Less Moving Components That Can Be Broken
The Pressure+ Kit Is Several Hundred Dollars Less Expensive
Uses Same Straight-To-Target Adjustment Style As Height-Based Kit
Cons
The Height+ Kit Has A More Accurate Method Of Getting To The Desired Height
The Pressure+ Kit Will Not Adjust For Changes In Load
What’s Included
The Pressure+ kit includes one harness and four pressure sensors.
Note
Already have a VU4 manifold and looking to install Pressure+ (while possibly replacing your height sensors with these pressure sensors)? You’ll want to order 4 of these inline tees to make your installation a breeze.
Related products
-
NEW!
ENDO-VT AIR TANK – 4 Corner/3 Gallon
$1,450.00Every good air suspension kit should have a high quality air tank to store the air produced by the air pumps. Most air tanks on the market are going to require you to run valves externally, meaning you will have more to deal with during install and more plumbing that will be visible. Our patented ENDO-VT™ valve integrated air tank provides a cleaner install by having the valves integrated into the air tank. This allows for quicker installs and an overall nicer presentation in your trunk, truck bed, or anywhere else you choose to mount your tank. The ENDO-VT also represents AccuAir’s next generation of solenoid valve technology that includes VFC™ (variable flow control) in addition to D.O.T. approved fully filtered and rebuildable FFPTC (fully-filtered push-to-connect) fittings.
About ENDO Tanks
AccuAir’s ENDO-Tank product line is the result of years of engineering accomplishments and represents the largest leap forward in air tank technology for 100 years. The system allows tanks to be built modularly with all precision machined aluminum components and with a bolted construction. As a result, these tanks are weld-free and leak-free. Ports are machined directly into the solid aluminum body and are flush with the outside of the tank. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank. These tanks are offered in raw aluminum.
What Size Tank Do I Need For Air Suspension?
One of the most common questions surrounding air suspension air tanks is “what size tank do I need for my air suspension kit?” Most air suspension systems are going to utilize a 3 gallon or 5 gallon air tank. The size you will need will depend on how often you plan on using your air suspension and the type/quantity of air compressor you are using. If you plan on airing out every chance you get, you may want to get a 5 gallon tank to store more air for quicker operation. Our ENDO tanks are offered in 3 gallon and 5 gallon options.
The 3 gallon ENDO air suspension tank dimensions are: Length: 18.312″ Height: 6.625″ Diameter: 6.625″
Add to cartMORE INFO -
NEW!
HEIGHT+ AIR SUSPENSION MANAGEMENT SENSOR UPGRADE
$1,155.00If you are wanting to get your vehicle to a certain height for parking, driving, or racing, you can simply use AccuAir’s Height+ TruPosition Height Sensors. These Height+ sensors provide accurate leveling regardless of load. You can pre-program 3 heights for lowered, ride height, and raised. These sensors allow you to get straight to the height you prefer without having to pulse your valves for quick and easy adjustments. These sensors can be added on to your kit and come standard in our Ultimate and Premium air suspension packages. You can add this kit to your existing e+ Connect system to transform your e-level+ system into a height-based air management system. Use the e+ app to see real time height data sent straight from the sensors to your phone.
Straight-To-Height
Let’s face it, most people running air suspension systems know exactly how they want their vehicles to sit when parked, driving, and raised. There is no reason to always be pulsing your valves to get the perfect height each time you want to get to a certain level. AccuAir’s Height+ upgrade allows for straight-to-height programming to allow you to get to the exact level you want each time for up to three different positions.
TruPosition Height Sensors
This Height+ Upgrade utilizes TruPosition technology, exclusive to AccuAir, to ensure that you get your perfect ride height every time no matter the load. This is great for those who may carry more passengers than normal or have heavier loads at times. These sensors are going to be some of the highest quality sensors on the market, giving you the most accurate height-based management that air suspension has to offer. Pick up a set today to complete or upgrade your AccuAir e-Level kit and enjoy stress free, accurate ride height adjustment at the push of a button.
Add to cartMORE INFO -
NEW!
E-LEVEL+ CONNECT ECU W/ HARNESS + PRESSURE SENSOR (TOUCHPAD REQUIRED)
$985.00IMPORTANT NOTE: THIS ECU IS NOT COMPATIBLE WITH THE JEEP JL OR JT AIR SUSPENSION KITS.
If you are looking for an entry level control system that is simple while offering smartphone capabilities, the e+ Connect ECU is a great choice. This kit will include the e+ Connect ECU+, with harness and pressure sensor, and through the e-Level+ app for iPhone and Android, it is a great source for diagnostics, and adjustability.
While this kit is a very simple way to get convenient air system management, you will need a few other components to finish up your install. You will need a manifold such as the AccuAir VU4 4 corner manifold to control the air in your system. If you are wanting a cleaner setup and an all-in-one solution, check out our ENDO-VT air tank which has the valve integrated into the tank.
Please note: A touchpad is required.
Bluetooth
AccuAir’s e+ Connect is 5.0 Bluetooth enabled for a simpler user experience and better performance and reliability. 5.0 Bluetooth allows for long range use and is standard on all systems.Over The Air Updates
Gone are the days of outdated software and controllers that have to be replaced due to advances in software. e-Level+ allows for over-the-air updates to future proof with the latest features and functions.RGB Backlighting
With the e+ Connect, you will get a beautiful and modern ECU with an AccuAir logo design and RGB backlighting. This allows you to get the perfect look for your trunk or wherever you choose to mount your ECU.Height Indication
When using the Height+ upgrade, you can get a visual display of your height % in the e-Level+ app.100% Plug-n-Play
The e+ Connect is going to include an ECU+, a wireless switch box, and the e-Level+ app. A 100% plug and play wiring harness will be included for easy installation.Ride-Height-On-Start
Want to give your air suspension an extra touch of customization? e+ Connect allows for your vehicle to automatically lift to the driving height upon starting your vehicle. when using e+height.eLevel+ App
This kit comes with accessibility for AccuAir’s e-Level+ app. This app allows you to make any adjustment to your air suspension system through the convenience of the app. The app is laid out similar to our TouchPad+ for great looks and easy usability.Automatic Calibration
When using Height+, this kit will automatically learn how to adjust for your vehicle through automatic calibration.Battery Saver mode
If your system has not been used in 24 hours, it will automatically shut off to save battery.3 Programmable Heights
Since this kit utilizes Height+ sensors, you will get to program 3 different heights, lowered, ride height, and raised. This allows you to get to the exact stance you are wanting instantly without having to purge your valves to get the right look.TruPosition Height Sensors
The Height+ system utilizes TruPosition height sensors to allow for accurate leveling of your air suspension system regardless of load.Important Note: Wireless device not included. Intended to be used with your phone or tablet. This product listing includes a harness and pressure sensor. Please contact us if you have any questions or concerns.
Add to cartMORE INFO -
NEW!
ROT-120 PLASTIC ARM REPLACEMENT
$35.00The ride height sensors on the AccuAir e-Level kits utilize a 2 piece system which includes the actual sensor, and the plastic arm that mounts to the top. Oftentimes, a malfunctioning ride height sensor may not require the full sensor to be replaced, only the arm. Instead of having to purchase the whole sensor, AccuAir has made it very simple to replace just the arm with this direct replacement ROT-120 plastic arm replacement.
This plastic arm simply bolts in place of the factory arm for a quick and easy replacement to get your air suspension system working properly again.
Add to cartMORE INFO
